Seadoo RXT-X Jetski Chocks

Suitable for:  2018+ Seadoo RXT-X ST3 hull models 

What's included? 

• 2 x Iroko chocks (Push to fit, Pull to remove)
• 4 x Flush Fit Deck fittings (for Teak decks) 
• 4 x Low Profile Deck fittings (for GRP & Faux Teak decks)
• 4 x Stainless steel deck plates
• 4 x Split bush
• Fixing screws

Dimensions: FWD: 580 (L) x 71 (W) x 125 (max H) // AFT: 580 (L) 71 (W) x 95 (max H)

Manufactured in the UK

Tools required for chock deck fittings installation: 

• Flush Fit deck fittings: 3mm drill bit, 68mm hole saw, 32mm hole saw, router, mastic
• Low Profile deck fittings: 3mm drill bit, 32mm hole saw, sealant

The Universal Chocks are self-adjusting and load spreading for all sit down model Jetski's up to 1500kg

The Universal Chocks are supplied with both flush and low profile deck fittings. 

• ‘Flush’ deck fittings -  for when a clean deck is required (applicable for teak decks)
• ‘Low Profile’ fittings - for flybridges when cavity space is limited, on GRP decks, or when more routing is not an option.

The chock are supplied with the attachment pin manufactured in a hard plastic to avoid any damage to the stainless deck plates. To ensure the chocks sit flush on the deck, the underneath of the chocks are rebated to allow for the “low profile” deck fittings. 

What's Included: 

• 2 x Universal Iroko Wood Chocks (FWD & AFT)
• 4 x Flush Fit Deck fittings (for Teak decks) 
• 4 x Low Profile Deck Fittings (for GRP & Faux Teak decks)
• 4 x Stainless Deck Plates
• Fixing Screws

Chock Dimensions: 580 (L) x 167 (max W) x 165 (min H) / 202 (max H) 

The MKII universal chocks now come as standard with 10mm rubber tops 

Manufactured in the U.K.